The perfect entry level 16 channel UHF wireless microphone system for clubs, restaurants, function centres, wedding ceremonies etc. It produces a clear, crisp vocal reproduction, whilst allowing freedom of movement. Supplied as a complete ‘ready to go’ system with a handheld microphone transmitter. 16 channels allow interference free operation with multiple systems in the one location. Output signal is via 3 pin XLR balanced or 6.35mm unbalanced jack, suitable for connection to most amplifiers. Front panel LED’s indicate active antenna and audio signal presence.

Supplied complete with handheld transmitter microphone

Features

• 16 Channels in 520 - 550MHz UHF Band
• RF and AF signal presence LEDs
• Tone squelch circuit for noise reduction
• Range up to 70m in ideal conditions
• 6.35mm unbalanced line/mic output
• 3 pin balanced XLR mic output
• Microphone transmitters require 2 x AA batteries (not included).

Specifications

• Receiver
• Carrier Frequency Range: 520-550MHz UHF band
• Frequency Stability: ±0.005%
• Oscillator: PLL Synthesised
• Receiving Sensitivity: 10µV over 80dB S/N ratio
• Image and Spurious Rejection: 80dB minimum
• Selectivity: >50dB
• Modulation Mode: FM
• IF Frequency: 1st: 243.95MHz; 2nd: 10.7MHz
• Tone Signal: 32.768kHz
• S/N ratio: >94dB, at 48kHz deviation and 60dBµV antenna input
• Audio Frequency Response: 50Hz to 15kHz (±3dB)
• Total Harmonic Distortion: Less than 1.0% (at 1kHz) Power Supply: 12V d.c.
• Audio Output: Balanced and unbalanced outputs for Single channel / Switching diversity (Mic.=-20dB / Line = 0dB)
• Current consumption: 130mA (max.)
• Dimensions (mm) WxHxD: 170 x 32 x 106
•  
• Transmitter
• Carrier Frequency Range: 520-550MHz UHF band
• RF Power Output: 10mW (max.)
• Oscillation Mode: PLL synthesized, 16 Channel selectable
• Frequency Stability: ±0.005%
• Maximum Deviation: ±48kHz with limiting compressor
• Spurious Emission: >60dB below carrier frequency
• Total Harmonic Distortion: <1% (at 1kHz)
• Microphone Capsule: uni-directional electret condenser unit
• Battery: 3V d.c. (2 x 1.5V AA size batteries ) or 2.4V d.c. ( 2 x 1.2V AA size rechargeable batteries)
• Current consumption: 120mA +/- 5mA
• Dimensions (mm) WxHxD: 266 x 550

*Specifications are subject to change without notice.